How To Program Peugeot 408 2013 All Keys Lost via OBD With Lonsdor K518ISE

Lonsdor K518ISE key programmer will read pin code from BSI and program key/all keys lost on PSA Peugeot Citroen and DS. Here’s a demo guide on programming Peugeot 408 year 2013 remote key when all keys lost by OBD.

Lonsdor K518ISE PEUGEOT Car List

Series	Origin	Year	Fuel Type	Function
308	Other	Other	Other	Key Programming
3008	Other	Other	Other	Key Programming
307	Other	06-	Other	Key Programming
308S	Other	Other	Other	Key Programming
Read PIN Code	Other	Other	Other	Read PIN Code
Classified by System	Smart Key	Other	Other	Smart Key System
Classified by System	Ordinary Key	Other	Other	Key System
207	Other	Other	Other	Key Programming
307	Other	-06	Other	Key Programming
508	Smart Key	Other	Other	Smart Key System
508	Ordinary Key	Other	Other	Key Programming
408	Other	Other	Other	Key Programming

Procedure:

Peugeot key programming requires a PIN code to access.  You can obtain pin code from original key card, by VIN or by some OBD devices (Lonsdor K518/VVDI2 PSA). It’s dangerous to disassemble BSI to calculate pin code.

Peugeot 408 OBD socket location

Step 1: Read Pin Code

Connect Lonsdor K518 host with OBD diagnostic socket

Select Peugeot-> Read PIN Code

Select Type 2:

*Type 1: If you still have working key. Insert working key, turn ignition on, turn ignition off (Repeat)

*Type 2: Have working key or all keys lost. If you select Type 2,  wipers will brush and headlights turn on. They will back to normal after 30 sec.

Read PIN Code from BSI by OBD successfully

Step 2: Program Key

Select Peugeot 408 (Chinese manual does not have 408 optional, you can enter from 308. English manual does have 408 model. Check K518ISE Peugeot list on the top)

Select Program Key

Turn ignition to ON position

Lonsdor K518ISE will read vehicle information, VIN, software version etc

Enter Pin code and confirm

Complete the operation within 15 sec:

Turn ignition off and turn it on

Press YES to continue

Program first key success.

Press YES to program next key.

Follow K518 prompts:

Program remote procedure:

1. Turn ignition off and remove key
2. Insert a new key and turn ignition ON
3. Press any button on remote key for 5 sec and release within 20 sec
4. Turn ignition off and remove key
5. If need to program more key, repeat step 2-4

Done.