How to use Lonsdor K518ISE to add smard key for BYD

One question from OBDexpress customer :

Hello ,Can k518 key master add key for BYD?How to do?If k518ise can do it ,i will order.

Solution:

If you add key for BYD, K518ISE won't ask for Pin code. 

If you program new keys when all keys lost, it requires 16-bit pin code, and if you need to change IK box, please ensure you have,15-bit repair code at the same time. For the 16-bit pin code, read out the key data and go for BYD service center to calculate. Procedure: Open K518ISE, click on IMMO -> BYD-> smart key-> G3- read key data, put the original new key close to the Start button and follow the prompt the read out the key data then send it to the professional locksmith or BYD service center. After that you use the pin code to program new key. 

BYD smard key --BYD smart key

Any further questions please feel free to contact us.

Best regards!

OBDexpress

More info ：

http://www.obdexpress.co.uk/service/how-to-use-lonsdor-k518iseto-program-bmw-fem-bdc-key-24628.html

Londor K518ISE key programmer Free Update News(14-12-2017)

Lonsdor company was upgraded  the Lonsdor K518ISE key programmer yesterday ,Free update-Mazda Series and Jeep, CHRYSLER, VOLKSWAGEN

here is the update 

info :

ADD:

JEEP Renegade 2015- smart key programming
JEEP Grand Cherokee fobik key programming
CHEYSLER fobik key programming 
VOLKSWAGEN Magotan/CC key programming
Mazda B-Series key programming
Mazda BT50 key programming
Mazda CX-9 immmobilizer and smart key programming
Mazda MX-5 key programming
Mazda new CX-7 smart key programming
Mazda new CX-9 smart key programming
Mazda cx-5 2017smart key p[rogramming

All Londor K518ISE support car list and function at here :http://www.obdexpress.co.uk/upload/pro/lonsdor-k518ise-key-programmer-car-list.pdf

How to program new smart keys to Ford Everest when all keys are lost?

Look here: How to program new smart keys to Ford Everest when all keys are lost, using Lonsdor K518ISE key programmer.

Main steps:

Step 1 Require at least 2 keys
Step 2 Ignition OFF and Open and close the door on the driver side
Step 3 Lonsdor k518ISE reads out vehicle info, current key number, PIN codes
Step 4 Put a new smart key into the slot (sensor area) and press the START button
Sensor area:
- Central armrest box
- Cup holder
Step 5 Lonsdor is programming the first new smat key, then put the second one into the slot and press START button
Step 6 Lonsdor continues to program the second. And recognize the programmed key number.
New keys programming completed.

In details...

Ford Everest

Ford Everest smart key

Ford Everest OBD location

Select Immobilizer->Ford->Everest->Other Region or America

Go to program new keys when all keys are lost
You should have at least 2 smart keys

Ignition OFF and Open and close the door on the driver side

Lonsdor K518 read Parts number, VIN codes, Current key number

Reading PIN codes

Put a new smart key into the slot (sensor area) and press the START button
Sensor area:
- Central armrest box
- Cup holder

Program new keys one by one

Key programming success

Test the new keys and verify both are working good

Job’s done!



https://www.amazon.com/AM1011-Engine-Reader-Automotive-Diagnostic/dp/B075R77WNN/